Last 15 posts from Magnus' Folly

Shadespire: Sepulchral Guard

Posted on November 23rd, 2017 under , . Posted by


As Shadespire has really taken off at the Club I could not help but get swept up in the excitement. There is only a small band of warriors to paint I realised they would need a lot of love and attention. I got my copy of the main rules and the Sepulchral Guard Set as in my opinion are the best looking miniature skeletons GW has ever done.

So, I set to work and managed to get them all done in one day. I won’t go too much into a painting guide with them but here is the colours I used
GW:
Mournfang Brown
Rhinox Hide
Iron Breaker
Ryzer Rust
Ulthuan Grey
Typhus Corrosion
Abbaddon Black
Nuln Oil
Agrax Earthshade
Valljo:
Stone Grey
DunkelGrau (Air)
Flat Brown
Prussian Blue
Magic Blue
Dead White (Air)

Vampire counts style shield

None Shall Pass!

From the back

Very “Jason and the Argonauts” pose

I am happy with how they came out and thoroughly enjoyed their one outing on the board (Even though Stoned Roses Orruks give them a good kicking.)
Next time… More Nightlords from me in Part 3 of into heresy and maybe some bloodbowl to start the Christmas
Thanks
Daveco

World Eaters Tactical Squad 1 (The first of many)

Posted on November 21st, 2017 under Posted by

Hello Folks,So here’s the first of what will be many tactical squads for my World Eaters.The army I’m making will all be making entry into the battlefield using either Drop Pods or Dreadclaws hence the 10 man squads.The army is based of the World Eater…

Spirit of the game part one

Posted on November 20th, 2017 under , . Posted by

Deep thought now….deep breath everyone.


I want to talk about how games are played and more specifically the prevailing attitude at section 8, our gaming club. 

Many of us are a similar age and were brought in to gaming with three strong principles:

1. Everything should be based and painted and what you see is what you get- no proxies!

2. Just because you can, it doesn’t mean you should.

3. You should try hard in games and try hard to have fun.

I’m going to try and encapsulate the way we usually play and see what people think, this is something that has developed over the years and is a perisistent mood in the club, we think it’s a positive thing and we hope you do too, feel free to comment and discuss how you do things.

So many of us are pretty passionate about the spirit games are played in and that each game is an event to enjoy in itself, so if a game isn’t fun, then why not?

1. Uneven playing field

Lots of times people blame their opponent, but is that ever true? Maybe the first time you play them and you’re not familiar with them, but after that not so much. I once played my infantry heavy world eaters army against an army with a knight, I had two guns that could damage it. I lost, big time and was pretty annoyed. But…. it was my fault, I actually talked about that and agreed to play it beforehand. I also played a guy once who was a total irritant through the game and swore his way through each turn despite beating me anyway, he was an ardent tournament gamer, his army was filth and it was a tournament, so I knew what was coming.

Is it time to rage quit yet?

 

What I’m getting at is, you often have an idea that the playing field may be uneven before you start.

2. Rules issues…..or even cheating

Rules issues will come up, some you’ll disagree with, some will break the game or make you lose. All you can do is be as up to date as you can, which is a challenge in itself. I find when learning a new game you should add at least another hour and both look through the rules throughout the game.

Rules matter not with a set of these…




Cheating….let’s not kid ourselves, it happens. I still haven’t found a good way to deal with it, if it’s rules then your opponent should “show me in the rule book” if they can’t then at worst it’s a dice off. Blatant cheating (an opponent of mine once picked up two extra dice for shooting three times in a row and I caught him, no coincidence) is really rough and after being on the wrong end a few times I know my limit, but it’s individual to us all.

3. Other Sources

Rough day at work, argument with spouse, feeling low? There’s load of reasons why you’re not up for it and sometimes in a red hot close game these will show. Best be aware when you’re not your best as you don’t want to be the guy people don’t want to play. People lead complex lives now and it’s important to realise that wargaming is an outlet valve for most, whether they know it or not. It’s best to ensure that this is remembered as in my opinion gaming is good to maintain a good work life balance and preventing burnout.

According to google gears fly out of your head if you’re stressed 

Hobby Management part 1- killing your darlings

Posted on November 17th, 2017 under , . Posted by

So, a tough article to write, the subject this time, the natural hoarding tendencies of the collector and ways to manage it. I think it’s fair to say that most of us are “collectors”, it’s called plastic crack for a reason and we’ve all bought a model that’s never been assembled/painted/seen again.

How much is too much?


A few years ago when I moved in with my now fiancée, I was forced to rationalise my collection, it felt tough at the time, but a watershed moment like this is useful in the long term. We just didn’t have the space and it made me realise how much of my stuff was just boxed and sitting on shelves. There were “dead games” that weren’t in production anymore, unassmbled figures, old armies in severe need of repair, paints that had turned, you name it and I have at least one of it. 
I turned to eBay, a few of my friends had some success and I was a decent enough painter, so after a few difficult sales I got better at it and it’s rare that I don’t make some form of profit, so I came up with my golden rules for managing my collection through sales, without further ado:
1. Paint all your stuff if you can, painted models sell better if you have some talent.
2. Store your figures well, there’s nothing more frustrating that having to repair or repaint figures just to sell them.
3. Take good pics, I’ll do an article on the little I’ve learnt on this at some point.
4. Sell the right stuff at the right time. GW price rises help, sell stuff when an army is re-released.
5. Most importantly, don’t be afraid to kill your darlings. Selling or getting rid of armies is sometimes necessary. Realising the signs is important, if you’re not using them, feel you could’ve done a better job or are just keeping them for nostalgia purposes, then maybe it’s time…
But how can you make it feel better? You put a lot of effort into that army, in a perfect world you’d keep them all right?
But should you catch ‘em all? 


Well my rules are that I photograph everything I sell and keep images for prosperity. I have pics of all my old armies, even though some are now in the Philippines, Germany, Australia, USA, Yemen and more. I’m pretty proud of that, my figures are more travelled than I am! The other thing I do if I can is sell to a friend, that way I can actually see someone enjoying the army, it doesn’t happen often though as most of my friend are holistic hobbyists and Base and paint their own stuff.
My recently sold Kaptain Flashgit Badruk, a nice figure to paint


So, don’t be afrai pd to slay you’re darlings. After all, plastic crack isn’t free and I know where my proceeds go! Next time I’ll talk about storing it all.
Last but not least if you want to expand your collection and really like my stuff, check out my auctions:

Shadespire- painting the Orruks

Posted on November 14th, 2017 under , . Posted by

Hello again, onto the latest shadespire releases, t9 be honest these were the ones I wanted. I love the new Orruks (Orcs). They’re chunky and powerful looking figures, less the jokey Orcs, more the “eat your face as soon as look at you” Orcs.

I wanted these to be black and yellow so I used the citadel paint app and went completely for the same colour scheme, the original plan was to go for more black checks, but I liked the yellow and stuck with it. I also liked the flesh tone they used, it was very organic, the 40k Orcs are a bit too grass green for me.

I’m going to go through painting the yellow, using the app has made me use brighter colours with more extreme edge highlights, I think this is a good thing and draws the eye more to the figure. Onto the yellow-
1. Basecoat of Averland Sunset
2. Shade the whole yellow surface with Casandora Yellow, I don’t use this often but maybe I should, it really warmed the basecoat up to create a contrast for the later layers
3. Yriel yellow to the raised surfaces
4. Edge highlights with Flashgitz Yellow
5. I added this stage myself, an extreme edge highlight of Dorn Yellow

Now you have a good depth of colour to the yellow, I’d also advise the paint app for the “clean black” method, I really like it and will definitely use it in future. Now, here’s some more Orruks!

Shadespire- painting the Orruks

Posted on November 14th, 2017 under , . Posted by

Hello again, onto the latest shadespire releases, t9 be honest these were the ones I wanted. I love the new Orruks (Orcs). They’re chunky and powerful looking figures, less the jokey Orcs, more the “eat your face as soon as look at you” Orcs.

I wanted these to be black and yellow so I used the citadel paint app and went completely for the same colour scheme, the original plan was to go for more black checks, but I liked the yellow and stuck with it. I also liked the flesh tone they used, it was very organic, the 40k Orcs are a bit too grass green for me.

I’m going to go through painting the yellow, using the app has made me use brighter colours with more extreme edge highlights, I think this is a good thing and draws the eye more to the figure. Onto the yellow-
1. Basecoat of Averland Sunset
2. Shade the whole yellow surface with Casandora Yellow, I don’t use this often but maybe I should, it really warmed the basecoat up to create a contrast for the later layers
3. Yriel yellow to the raised surfaces
4. Edge highlights with Flashgitz Yellow
5. I added this stage myself, an extreme edge highlight of Dorn Yellow

Now you have a good depth of colour to the yellow, I’d also advise the paint app for the “clean black” method, I really like it and will definitely use it in future. Now, here’s some more Orruks!

Shadespire- painting the Bloodborne

Posted on November 13th, 2017 under , . Posted by

With the liberators all finished it’s time to sort out some opponents. I like the bloodborne models, they don’t make me as bitter as sigmarines did. They also have a lot of flesh on them, which I now see as a challenge to make it look good, in the last I think flesh was a scary thing to paint, colours were not ideal, coverage wasn’t great and washes didn’t lie as well. Now it’s much easier. So without further ado, here are my Bloodborne.

The method for the flesh was taken straight from the citadel paint app, I wanted these guys to be super pale, this would create a good contrast with the red and black. So the method was as follows:
1. Basecoat of Rakarth Flesh.
2. Wash with Reikland Fleshshade.
3. Layer the raised surfaces with Flayed One Flesh
4. Slight edge highlights with Palid Wych Flesh
Then you should have a seriously pale blood spilling, khorne worshipping hombre!
I enjoyed painting this guy and the next most, lots of animation in the sculpt







The citadel paint app really helped with these, I did each group in a week, chipping away at stages for an hour or two every other night. Pretty happy with the results, next onto the Orruks!

Shadespire- painting the Bloodborne

Posted on November 13th, 2017 under , . Posted by

With the liberators all finished it’s time to sort out some opponents. I like the bloodborne models, they don’t make me as bitter as sigmarines did. They also have a lot of flesh on them, which I now see as a challenge to make it look good, in the last I think flesh was a scary thing to paint, colours were not ideal, coverage wasn’t great and washes didn’t lie as well. Now it’s much easier. So without further ado, here are my Bloodborne.

The method for the flesh was taken straight from the citadel paint app, I wanted these guys to be super pale, this would create a good contrast with the red and black. So the method was as follows:
1. Basecoat of Rakarth Flesh.
2. Wash with Reikland Fleshshade.
3. Layer the raised surfaces with Flayed One Flesh
4. Slight edge highlights with Palid Wych Flesh
Then you should have a seriously pale blood spilling, khorne worshipping hombre!
I enjoyed painting this guy and the next most, lots of animation in the sculpt





The citadel paint app really helped with these, I did each group in a week, chipping away at stages for an hour or two every other night. Pretty happy with the results, next onto the Orruks!

Shadespire- painting the liberators

Posted on November 9th, 2017 under , . Posted by

Well I had a 15 minute trial run of this and was impressed so ordered the starter set. The game was quick, solid rules wise and pretty competitive. I also saw an opportunity for a project with this game that I’ll talk about it I ever start it… T…

Shadespire- painting the liberators

Posted on November 9th, 2017 under , . Posted by

Well I had a 15 minute trial run of this and was impressed so ordered the starter set. The game was quick, solid rules wise and pretty competitive. I also saw an opportunity for a project with this game that I’ll talk about it I ever start it… T…

Castellax Achea Battle Automata- Magic Robots

Posted on November 7th, 2017 under , , . Posted by

Ok, I loved these when they came out, I first saw them at the Heresy Weekender and I knew one day, they would be mine… Maybe not a babe….but they will be mine So, setting down to paint them, well by now the red is a pretty robotic process, using…

Castellax Achea Battle Automata- Magic Robots

Posted on November 7th, 2017 under , , . Posted by

Ok, I loved these when they came out, I first saw them at the Heresy Weekender and I knew one day, they would be mine… Maybe not a babe….but they will be mine So, setting down to paint them, well by now the red is a pretty robotic process, using…

On to Heresy: Part 2

Posted on November 6th, 2017 under Posted by


On to Heresy Part II:
Building and Converting a VIII Legion Terror Squad.
Last time I shared some thoughts about the Nightlords and spoke about the reasons I like them. This time I will be walking you through how I build my newest addition to the Army.
1 Preparation.
Ok this sounds obvious but making sure you have all the tools, bits and glues needed. For this project I need some things that are not included in a normal GW set.

  • ·         Clippers
  • ·         Model Knife
  • ·         Razor Saw
  • ·         Super Glue
  • ·         Plastic glue
  • ·         Green Stuff (Kneadatite putty)

Kits I will need

  • ·         X10 MkIII Power Armoured Marines (the rest of my Nightlords are in MkIII where possible, I think it just looks scarier)
  • ·         MkIII Power Weapons Upgrade pack (Forge World)
  • ·         Volkite Charger Pack (Forge World)
  • ·         MkIII VIII Legion Shoulder Pads (Forge World)
  • ·         Chain-Glaive Set (Forge World)
  • ·         Skulls… Lots of Skulls (Luckily GW do a box with 300+ skulls in)
  • .     And some extra bits from my bits box

Yes, I know this is going to be an expensive unit with all those Forge World goodies, but other than the Shoulder pads I won’t be using all the bits. They will be used on future projects.
Thanks to GW for plastic heresy kits, they really save the wallet
2 Get to it.
Now I have all my stuff ready, time to do the building… Cue imagination. I love Terror squads, formed from the ruthless and brutal legionaries in the VIII. Terror Squads are a unit of murderers and tyrants without rival. I am going to try to represent this with my conversions, trying to make each miniature look a little different form the others.
MkIII Armour just looks much more brutal
The Headsman (Sgt.) has the much-feared Chain-glaive, a grisly trio of skull trophies and with an ironically worn honour crest. He is a striking figure within the Claw, most likely he killed his way to that position and now leads his Claw until he is killed. Other members of the Squad carry a mix of weapons, Bolt Pistols/guns, Volkite Chargers and combat blades. I wanted them to look as individual as possible. I don’t want to overdo the skulls, just the right amount is in order. When painted the bone colour will make a good contrast to the dark armour.
‘Honour’ crest worn ironically
MkIV chain sword from my bits box
Volkite fun!
 3 Prep and Primer
OK, as I have used resin components I will have to do a little prep-work before using the primer.
I have already washed the resin before assembly but sometimes it is tricky for primers to get a good layer over the resin. So I use Army Painter Anti-shine, it is great for putting a coat over resin that the primer can stick to.
Once that is done its time for the old favourate – UPOL black car Spray. It gives great coverage, is cheap and easy to get.
UPOL – its great!
In midnight clad? Not quite yet.
4 Base Coat
These guys have to fit in with the rest of my army, unfortunately GW have discontinued my Nightlords colour (Necron Abyss) After a good year of searching the closest I can find is Vallejo Dark Prussian Blue, so that’s what I use. Here is our Terror Legionary in this lovely blue.
That’s better
Next Time…
I will be finishing the paint on the squad, taking it step by step and showing you how I get a good table top standard with the minimum of fuss.
TTFN
Daveco

On to Heresy: Part 2

Posted on November 6th, 2017 under Posted by


On to Heresy Part II:
Building and Converting a VIII Legion Terror Squad.
Last time I shared some thoughts about the Nightlords and spoke about the reasons I like them. This time I will be walking you through how I build my newest addition to the Army.
1 Preparation.
Ok this sounds obvious but making sure you have all the tools, bits and glues needed. For this project I need some things that are not included in a normal GW set.

  • ·         Clippers
  • ·         Model Knife
  • ·         Razor Saw
  • ·         Super Glue
  • ·         Plastic glue
  • ·         Green Stuff (Kneadatite putty)

Kits I will need

  • ·         X10 MkIII Power Armoured Marines (the rest of my Nightlords are in MkIII where possible, I think it just looks scarier)
  • ·         MkIII Power Weapons Upgrade pack (Forge World)
  • ·         Volkite Charger Pack (Forge World)
  • ·         MkIII VIII Legion Shoulder Pads (Forge World)
  • ·         Chain-Glaive Set (Forge World)
  • ·         Skulls… Lots of Skulls (Luckily GW do a box with 300+ skulls in)
  • .     And some extra bits from my bits box

Yes, I know this is going to be an expensive unit with all those Forge World goodies, but other than the Shoulder pads I won’t be using all the bits. They will be used on future projects.
Thanks to GW for plastic heresy kits, they really save the wallet
2 Get to it.
Now I have all my stuff ready, time to do the building… Cue imagination. I love Terror squads, formed from the ruthless and brutal legionaries in the VIII. Terror Squads are a unit of murderers and tyrants without rival. I am going to try to represent this with my conversions, trying to make each miniature look a little different form the others.
MkIII Armour just looks much more brutal
The Headsman (Sgt.) has the much-feared Chain-glaive, a grisly trio of skull trophies and with an ironically worn honour crest. He is a striking figure within the Claw, most likely he killed his way to that position and now leads his Claw until he is killed. Other members of the Squad carry a mix of weapons, Bolt Pistols/guns, Volkite Chargers and combat blades. I wanted them to look as individual as possible. I don’t want to overdo the skulls, just the right amount is in order. When painted the bone colour will make a good contrast to the dark armour.
‘Honour’ crest worn ironically
MkIV chain sword from my bits box
Volkite fun!
 3 Prep and Primer
OK, as I have used resin components I will have to do a little prep-work before using the primer.
I have already washed the resin before assembly but sometimes it is tricky for primers to get a good layer over the resin. So I use Army Painter Anti-shine, it is great for putting a coat over resin that the primer can stick to.
Once that is done its time for the old favourate – UPOL black car Spray. It gives great coverage, is cheap and easy to get.
UPOL – its great!
In midnight clad? Not quite yet.
4 Base Coat
These guys have to fit in with the rest of my army, unfortunately GW have discontinued my Nightlords colour (Necron Abyss) After a good year of searching the closest I can find is Vallejo Dark Prussian Blue, so that’s what I use. Here is our Terror Legionary in this lovely blue.
That’s better
Next Time…
I will be finishing the paint on the squad, taking it step by step and showing you how I get a good table top standard with the minimum of fuss.
TTFN
Daveco

More World Eaters

Posted on November 2nd, 2017 under , , . Posted by

Hi Folks, slow week on the hobby front for me, work getting in the way of life and all that. That said, thought I’d try and show off the newest addition to Angron’s army.A Leviathan Siege Dreadnought.So there he is, the big lad himself.Only used h…