Prusa I3 Mk3S - Thermistor Woes and Superb Customer Service

Last night I kicked off a 15 hour print for a "secret LWTV" project.  Ok it may not really be all that secret - I was just trying to sound cool.  Anyway, the print seems to have stopped at the 94% completion point and I was seeing a mintemp error on the printer's control panel.After inspecting the printer it looks like one of the wires to the Thermistor has broken from wear and tear.  I'm 99% sure this is from use error as I've been struggling a bit with the filament jamming and have taken the print head apart at least 5 times so may have not made sure the wire was clear the last time I reassembled the printer.I went online to the Prusa support site and was able to quickly diagnose the issue via their superb documentation.   I took the picture you see above and then opened a chat box with Prusa support.  Horsa jumped on the chat with me and quickly confirmed my diagnosis and just sent me a new Thermistor for free.  Thermistors are cheap but this unit is coming from the Czech Repu

» View Source Article